Live Green and Earn Points

Recyclebank

Because You Asked

Because You Asked: Why Do I Need To Clean Metal Recyclables?

By Recyclebank |

Even if an item can be processed with residue on it, there’s a good chance it’ll come into contact with other items that need to be kept clean.

Dear Recyclebank: Why must metal cans be cleaned before recycling? Won’t any small bits of food remaining on the metal be burned off during the melting process? –Dan K.

Dear Dan: Many, but not all, materials can be easily cleaned during the recycling process. Depending on the recycling system your local waste handler uses, this may mean you need to do some quick cleaning before tossing that soup can in the recycle. Cleaning recyclables before putting them in your recycling is most important in areas where single-stream recycling systems are used. Dual-stream recycling systems, where paper products are kept separate from the rest, depend less on consumers cleaning every last bit of food off of metal cans, for instance.

If you’re required to separate your metal, plastic, and glass recyclables from your paper products, you have a dual-stream recycling system. In this case, while you’ll likely still be asked to do a certain amount of rinsing and cleaning before you place items in your recycling container, the need to clean is less pressing than in a single-stream system where all recyclables are collected together without any sorting on your end.

Why? It all boils down to cross-contamination. Paper will absorb grease and other food particles from other dirty recyclables it comes into contact with. Unlike metal, glass, or plastic, paper is typically processed at temperatures below the boiling point (212˚ Fahrenheit). In fact, anything above 250˚(F) can cause damage to the paper fibers being recycled. Because of this, the paper recycling process won’t burn off food residue in the way that other materials-recycling processes might. Contaminated paper can lower the quality of a batch of recycling, making it unsuitable for the market. This unusable material will usually be sent to the landfill once it arrives at the materials recovery facility (MRF) to prevent further contamination at the MRF: Recycling costs can go up accordingly, which can drive up the cost of recycled goods for consumers, which could then diminish the viability of the recycling system. That’s no good.

While single-stream recycling is more convenient for consumers, the perils of contamination can take their toll. The EPA reported that in 2014 an average of 16% (by weight) of incoming single-stream recycling is contaminated. Spread across the entire US, that figure adds up to a monumental loss in material value and resources. While there are multiple causes for this, including damaged items and the incorrect inclusion of non-recyclables in people’s recycling containers, if everyone made an effort to keep their cans and jars clean, it would make a positive dent in that number.

If your area uses dual-stream recycling, you probably don’t need to be as concerned. However, keep in mind that any cleaning you do will save time and labor on the other end, helping to drive down costs and keep your program profitable. Of course, always follow any cleaning guidelines laid out by your hauler.

SOURCES: Environmental Protection Agency, North Carolina State University

Does your municipality use single-stream or dual-stream recycling? How do you feel about your system? Share your thoughts in the comments below.

Share with Your Friends & Family
  • Lanette H. 1 month ago
    It makes me mad when I go to our recycle center and I have cleaned and dried all my recyclables and I see peanut butter jars and other items with food in them! I wish there was a camera there to see who is doing it, since that contaminates everything!!
  • Dawn A. 4 months ago
    Instead of just draining hot water from potatoes or pasta down the drain I use it to help clean those hard to clean recycles. I place pb containers or oily ones in the sink add a drop or two of dish soap then drain the hot water into each container. After supper I wash them out and it comes right out.
  • Deborah W. 6 months ago
    I always clean and rinse metal and plastics also glass. Yet - Why would they have to be completely dry when it rains outside - everything gets soaked - clean should be sufficient. We get a lot of rain here. I am learning new ways of cleaning recyclables without wasting water which I was doing. Work in progress.
  • Paula J. 8 months ago
    I was so happy when our small town got a recycling site. It takes most items, including electronics and glass! I definitely wash all peanut butter jars! I rinse all containers that had food in them and that includes my plastic zip bags. Unfortunately things like cleaning products never seen to be recyclable. One of my pet annoyances is containers and bags which look like they should be recycled but have no marks to distinguish them. If a company uses such things does adding the symbol cost so much to add to packaging?
  • Marcia K. 9 months ago
    I clean the metal containers regardless. It keeps my garbage can clean. There is no stench. That alone is worth it. I clean up the kitchen after eating anyway, so it takes seconds to rinse those too.
    • Victoria P. 9 months ago
      I do the same, although, peanut butter jars and some other jars are hard to clean and require a lot of water to clean.
    • Barbara W. 1 month ago
      I put water in peanut butter jar and shake ,shake ,shake then put that water in dogs bowl , he loves it. then same again later, then a 3rd time. ..gets the most of it. LAST to the left over gray dish water for the final rinse.
    • Barbara W. 1 month ago
      because they are hard to clean is why I get 3 rounds of partial water out of it for the dog. Its the 4th round that goes to the gray water. My Peanut butter jars are plastic, and the hardest to clean.
  • View More